+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2008
    Posts
    709
    Points
    444,837.48
    Rep Power
    202

    Default [TUT] Installing Despertar Del Cementerio 5 (DCv5)

    Installing DCv5 to your PSP
    Files to download before starting the guide:
    DCV5
    1.50 UPDATE
    3.40 UPDATE
    3.90 UPDATE
    CONFIG.TXT
    Hellcat's Pandora Installer
    1.50 Kernel addon for 3.90 (ONLY FOR PHAT PSP, NOT SLIMS) (OPTIONAL)

    Equipment Needed:
    PSP with custom firmware 2.xx or 3.xx
    A USB cable that connects your PSP to the computer
    An official SONY battery or DATEL tool battery- Fake batterys do not work
    A sony PSP charger to change your battery back to normal

    Tutorial

    The new unbricker by Dark Alex is made in a time machine format so instead of making the DCv5 stick like DCv3 or 4 with the MSIPL.BIN it has its on ipl called IPL.BIN made in the TM folder, so you have to install it slightly differently. (You need CFW to do this.) This will UPDATE/UNBRICK your PSP to 3.90 M33-3 :twothumbs:

    1.Download all files listed above and leave on desktop for easy access.

    2. Copy the 1.50 update to the root of your memory stick and name it UPDATE.PBP Copy pan3xx to the game folder then disconnect the USB. Launch Hellcat's Pandora Installer from the memory stick. Once launched you will get a menu that looks like this:



    LINK: http://www.uploadpics.in/files/9409fuqe6jbsh0l57mx5.jpg

    Format the stick by pressing R+X then L+R+X. This will delete all your data on the memory stick so make sure you have backed up everything!!!!

    3.Reboot the PSP and manually, make a PSP folder in the root and a game folder inside and copy DCv5 inside. Go back to the root of the memory stick insert each PBP file corresponding to their firmware number E.G. 3.90= 390.PBP also make sure that you still have the UPDATE.PBP at the root.



    LINK: http://www.uploadpics.in/files/a3vsmwt0ico86i65vnqt.jpg

    4. Go to the game icon on the XMB and launch DCv5. Once launch it will say press cross to install. Press cross to install and it will start building up your memory stick. When it finishes it will boot back onto the xmb.

    Each PBP file is important for the installation:
    1.50- Basic Building blocks of pandora
    3.40- Enables slim PSP's to see instalation (NO more blind installation!!!)
    3.90 Used for the unbricker and M33 PRx's

    5. Once this is done you should have on the root the PBP files and a TM folder. Go in to the TM folder and you will see DCv5 folder and maybe a config.txt (Config doesn’t have to be there after dcv5 installer has finished) Copy Config.txt into the TM folder and overwrite the previous file if you are asked, this means that DCv5 will boot up with out any buttons. To edit this go into config.txt and change the nothing to a button such as “L” “R” “CROSS”. (NOTHING means that it will load up without any buttons being pressed)



    LINK: http://www.uploadpics.in/files/7ts4dh759gbgm5hb4asn.jpg

    Examples:

    NOTHING = "/TM/DC5/ipl.bin"; -- will boot up with no buttons pressed
    L = "/TM/DC5/ipl.bin"; -- hold L to boot up DCv5



    LINK: http://www.uploadpics.in/files/cjcl6yvp1eqszwuf454q.jpg

    SKIP THIS STEP IF YOU HAVE A PANDORA BATTERY OR DATEL TOOL BATTERY

    6.Once you have done this copy pan3xx again into the game folder and launch from the xmb. Press R+O to store your PSP battery serial and the O to change it into a jigkick battery. (Newer PSP's do not allow writing to PSP batterys so for this step you may have to use a friends PSP) Some slim batterys are not compaterble with PAN3XX make sure if you use a slim battery it is at your own risk!



    LINK: http://www.uploadpics.in/files/9409fuqe6jbsh0l57mx5.jpg

    7.Once you have done this, you have a memory stick with DCv5 and a jigkick battery.

    HOW TO USE
    Put the memory stick into the PSP for unbricking or CFW and then put in the jigkick battery. (Make sure if you assigned a button for DCv5 that, you are holding onto it when you put in the jigkick battery) The PSP should boot and show some options. From there, it is self explanatory X to install 3.90 M33-3 or O just for 3.90 OFW. MAKE SURE YOUR BATTERY IS FULLY CHARGED BEFORE UNBRICKING

    Change your PSP battery back to normal
    Put the PSP charger into the PSP and turn on the PSP, then insert your battery launch pan3xx for the game icon and press R+[] to restore your serial number this means that you battery will go back to normal. (If you forgot to back-up your PSP battery serial don’t wet your self press [] to restore a fake serial but this may have some side effects such has battery charge levels shown incorrectly.

    Theories
    Because Dark Alex has made DCv5 in a different way, I believe that it is even more possible to launch two version of DC such has 3 and 5 from the same memory stick. I am not so sure about this but anyone who has done this can perhaps leave a comment.

    Thanks I hope this guide helps you.

    Please leave a feedback about the guide!

  2. #2
    Join Date
    Sep 2008
    Posts
    1
    Points
    10.00
    Rep Power
    196

    Default

    i get stuck on 2. where it says to luanch hellcats pandora . i dont know where to luanch it at?

  3. #3
    Join Date
    Feb 2008
    Location
    New York
    Posts
    3,114
    Points
    1,979,556.34
    Rep Power
    218

    Default

    .....OLD, get number 7 best one out!

  4. #4
    Join Date
    Jun 2008
    Posts
    709
    Points
    444,837.48
    Rep Power
    202

    Default

    yes old but i cant be bovered to update, also if they can install this they can install 7 way easyier.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts