+ Reply to Thread
Page 1 of 2
1 2 LastLast
Results 1 to 10 of 12
  1. #1
    Join Date
    Aug 2009
    Posts
    21
    Points
    90,038.00
    Rep Power
    179

    Cool Creator's Basic Hacking Guide

    PSP Hacking Basics
    ;Creator
    ;Using NitePR

    Code:
    -Index-
    
    1. The Basic Code
    --
    2. Searching Codes
    --
    3. Working With NitePR
    --
    4. END
    ---------------
    1. The Basic Code
    The Basic Code Hack a Name, Address, and a Value

    Code:
    How it will look in terms of reference:
    
    Code:
    #Name
    0xAddress 0xValue
    --
    The Address and Value has 8 Digits
    Example:
    Address= 0x00000000
    Value= 0x00000000
    -- How The Code will actually Look: ;Example: My Resistance: Retribution Inf Ammo Code
    Code:
    #Creator's Inf Ammo
    ;Creator
    0x00271f18 0x00000000
    -- A NitePR Code can End With ONLY:
    Code:
    0
    4
    8
    C
    
    Example:
    0x00000000
    0x00000004
    0x00000008
    0x0000000C
    ---------------

    2. Making PSP Codes
    Here Are Some Guides To Making PSP Codes
    2A. Text Modification

    1. Go into the game that you want to make a text mod for
    2. Find the text that you want to mod, some text in games can't be modded
    3. Open nitepr and go over to the searcher tab
    4. Hit "Find text"
    5. Enter in the text that you want to mod excactly how it shows in the game.
    6. Hit search
    7. You should get at least one or more results so choose the one that you think it is
    8. Scroll down to whatever adress you think is right and hit select
    9. Hit copy adress
    10. Add an empty cheat

    Code:
    #Blank text mod 
    0x00000000 0x00000000 
    0x00000000 0x00000000 
    0x00000000 0x00000000 
    0x00000000 0x00000000 
    0x00000000 0x00000000
    11. Paste the first adress onto the first line, let's say the adress is 0x00492478 so it should look like this:

    Code:
    #Text Mod (Simi Blank) 
    0x00492478 0x00000000 
    0x0049247C 0x00000000 
    0x00492480 0x00000000 
    0x00492484 0x00000000 
    0x00492488 0x00000000
    12. Go over to the ASCII value and change it to say what you want, if you do not have enough room you will have to add more adresses by moving the last digit in the adress up by one each time for each line, you can do this as much as needed.When you mod the ASCII the hex values will change as well.
    - If it is 0 it will move up to 4
    - If it is 4 it will move up to 8
    - If it is 8 it will move up to C
    - If it is C it will move up to 0

    Code:
    #Text mod 
    0x00492478 0x00000000 
    0x0049247C 0x00000000 
    0x00492480 0x00000000 
    0x00492484 0x00000000 
    0x00492488 0x00000000
    The ASCII Value Is the Key To Text Mod

    13. Turn the code on and now you should be able to see your modded text, if not you may have to refresh the screen you are on.
    -----
    2B. Flash
    ;SuperSpeed

    1. Enter a game room and stay completely still and DONT move now bring up the nitepr menu
    2. Search "Exact Value" of 0x00000000
    3. Now exit the menu
    4. Move and WHILE moving call up the nitepr menu
    5. Search "GREATER"
    6. Then exit and completely come to a Stop
    7. Once you've completely stopped bring up the nitepr menu and "SEARCH EXACT" 0x00000000
    8. Then repeat these steps til you get your desired result

    WARNING! Your result will Maybe be DMA
    -----
    2B-2. Flash Method 2

    1. Start a 32 bit unknown search
    2. Move then search different.
    3. Stand still search same.
    4. Move again search different.
    etc. until about 10 or less codes

    WARNING! This Will Take Pretty Long, and Your result will Maybe be DMA
    -----
    2C. Level Modification

    1. Start a New Game with a new character then Search 32-bit (You Usally Start at lvl 1)
    2. Now Level Up, and Exact Search 2 (Because you should be level 2)
    3. Now Move around Jump and what not the go back in NitePR and Search Same (Because Your Still level 2)
    4. Now Keep Doing this until you have 1 or 2 addresses and then you'll be able to mod your Characters Level
    -----
    2D. Attack Speed / Attack Modification

    1. Set NitePR Freeze to: True
    2. Hit,Open NitePR, Search Greater
    3. Stand Still, Open NitePR, Search less
    4. Keep Standing Still search Same
    5. Keep doing this until you have 1 or 2 Codes left and then you'll eather a Attack Speed or Attack Mod Code.
    -----
    2E. Non -Playable Character Kills Modification

    1. Start a new game with a new character
    2. Kill 5 NPCs
    3. Search 5
    4. Now Kill 2 more
    5. Search 7
    6. Now Search Same
    7. Keep Going on until you have 1 or 2 addresses, then you'll have NPC Kills Mod Code
    -----
    2F. Item Add-on Modification

    1.Take off all but 1 item (Lets say it give you +10 Strength)
    2. Search 10 (You May Have to use The Float Value of 10 which is: 41200000)
    3. Then take it of and search 0x00000000
    4.Now keep doing this until you have 1 or 2 address and then you'll have a Item Add-on Mod Code
    -----
    2G. Infinite Ammo

    1. Search Exact of how much ammo you have
    2. Shoot a couple bullets
    3. Search Exact again
    4. Exit out of nitePR
    5. Open NitePR Again
    6. Search Same
    7. Keep Doing this Until you have 1 through 10 Results
    -----
    2H. Infinite Stamina

    1. Set NitePR to Pause? True
    2. Search Exact: 0x42C80000 (100 in Value.FLOAT)
    3. Make Your Stamina Go Down
    4. Search Less
    4. Make Your Stamina Even Lower
    5. Search Less
    6. Make your Stamina Go all the way back up
    7. Search Exact: 0x42C80000 (100 in Value.FLOAT)
    8. Keep Doing this Until you have 1 through 15 Results
    ----
    2I. Infinite Health

    1. Set NitePR to Pause? True
    2. Search Unknown 32 bit (Dword)
    3. Make Your Health Drop
    4. Search Less
    5. Make Your Health Drop
    6. Search Less
    7. Gain Health
    8. Search Greater
    9. Make your Health Drop
    10. Search Less
    11. Gain all your Health Back
    12 Search Greater
    13. Go Out of NitePR
    14. Go back into NitePR
    15. Search Same
    16. Keep doing this until you have 1 through 5 Results
    -----
    2J. Infinite Mana

    1. Set NitePR to Pause? True
    2. Search Unknown 32 bit (Dword)
    3. Make Your Mana Drop
    4. Search Less
    5. Make Your Mana Drop
    6. Search Less
    7. Gain Mana
    8. Search Greater
    9. Make your Mana Drop
    10. Search Less
    11. Gain all your Mana Back
    12 Search Greater
    13. Go Out of NitePR
    14. Go back into NitePR
    15. Search Same
    16. Keep doing this until you have 1 through 5 Results
    ---------------

    3. Working With NitePR
    Code:
    3a. What The Search Type Selection Looks Like:
    
    Code:
    Find Exact Value
    Find Unknown Value - 8bit
    Find Unknown Value - 16bit
    Find Unknown Value - 32bit
    Find Text
    3b. What The Search Opitions Look Like:
    Code:
    0=Same
    1=Different
    2=Greater
    3=Less
    4=Inc by
    5=Dec by
    ---------------

    4. END
    THE END
    Please Rate and Comment.

    Enjoy Coding,
    -Creator

  2. #2
    Join Date
    Apr 2008
    Location
    Chi-Town
    Posts
    1,202
    Points
    614,504.78
    Rep Power
    200

    Default

    excellent guide my friend ;]

  3. #3
    Join Date
    Jan 2008
    Location
    Your mom's fresh shaven Cun+.
    Posts
    2,598
    Points
    1,678,722.43
    Rep Power
    210

    Default

    For #1 on the basic code, a code can not ONLY end in 0,4,8 or C. It can only end in those if you choose your code to be 32 bit. You can have a 8 bit code and have it end in an odd number, for example, my host code in DM.





  4. #4
    Join Date
    Aug 2009
    Posts
    21
    Points
    90,038.00
    Rep Power
    179

    Default

    Well Most Beginners use only 32 bit.


    "If Winning Isn't Important, Why Do They Keep Score?"
    PSP Coder, DS Coder, GFX Design
    PSP Style: PSP -2015 (Modded Slim)
    Custom Firmware: 6.00m33-6

  5. #5
    Join Date
    Aug 2009
    Posts
    61
    Points
    602,686.00
    Rep Power
    178

    Default

    dam it your so damn pro..

  6. #6
    Join Date
    Jan 2008
    Location
    Your mom's fresh shaven Cun+.
    Posts
    2,598
    Points
    1,678,722.43
    Rep Power
    210

    Default

    Quote Originally Posted by Creator View Post
    Well Most Beginners use only 32 bit.
    Most of the people I know actually started with 8 bit codes before moving on to this kinda stuff. :P





  7. #7
    Join Date
    May 2009
    Location
    In a place.
    Posts
    596
    Points
    827,868.51
    Rep Power
    184

    Default

    hes special maybe :O

    Check out my psp cheat device DarkFrost!
    Check out my new game Robot Universe!

  8. #8
    Join Date
    Sep 2009
    Location
    at my house
    Posts
    15
    Points
    150.00
    Rep Power
    178

    Default

    u got lazy.... half of these say the same thing worded differently

  9. #9
    Join Date
    Sep 2009
    Posts
    11
    Points
    3,608.00
    Rep Power
    178

    Default

    nice guide man

  10. #10
    Join Date
    May 2009
    Location
    In a place.
    Posts
    596
    Points
    827,868.51
    Rep Power
    184

    Default

    wrong, nitepr codes cannot just end with 0, 4, 8, and C
    8 bit can end with everything
    16 bit is 0, 2, 4, 6, 8, A, etc;
    32 bit can only end with 0, 4, 8, and C

    Check out my psp cheat device DarkFrost!
    Check out my new game Robot Universe!

+ Reply to Thread
Page 1 of 2
1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts