NitePR install

[Syphongamer08]

Here is my first tut for all you newbs who need help.... Pass is Syphongamer08

Step 1.

Download this if your on 3.71 M33 CFW
http://www.megaupload.com/?d=2YEWHAN0

Download this if your on any other CFW
http://www.megaupload.com/?d=HCC08MWY

Step 2.

Right click the Downloaded file and hit "extract files" extract to your desktop

Step 3.

After you extract the files you should get a folder called Seplugins, Open it

Step 4.

Now plugin your psp via usb cable. A window should pop up, it should say something like "Removable disk M" (thats what mine is) Pay attention to what driver its in, it will always be the same. Anyway when that window pops up scroll all the way to the bottom and click "open folder to veiw files"

Step 5.

After that you click that you should see a window that has like three files that say: PSP, PICTURE, VIDEO, and so on This is called "The root of your memory stick" . now minimize that window and go to your desktop and open the folder you extracted eralier. It Should be called "Seplugins"

Step 6.

After you open that folder you should see three things, those are a nitePR folder, A game txt, And a prx called Nitepr.prx

Step 7.
** Important **
If you have a seplugins folder in your root of your memory stick skip this step.

However if you dont just copy the seplugins folder on your desktop and paste it in the root of your memory stick.

(pepole who didnt have a seplugins folder skip steps 8 and 9)

Step 8.
If you do have a Seplugins folder already in the root of your memory stick, just copy the NitePR folder and the nitepr.prx from the extracted file to your seplugins folder to the root of your memory stick.

Step 9.

Now after you pasted those two items to your root, open your game.txt and put this inside it (without the quotes)
"ms0:/seplugins/nitePR.prx"

Step 10.

Hey look at you your almost done, Now after you did that unplug your psp and completley shut down your psp by holding the power button.

Step 11.

Now go into recovery mode by holding down Rtrigger and powering up.

Step 12.

Once your in recovery mode, scroll down to plugins ( its the 6th one down)
click on it. once it opens you should see something that say nitePR.prx [GAME] (disabled) click x and it should enable. now exit recovery mode

Step 13.

WOOPIE your done. see that wasnt hard. after you put your codes on niteor start your game and like 30 seconds after your game starts up on top of your screen it should say tap home twice and then hit +/- at the same time. do that and nitepr starts. To activate your codes just hit the musical note button next to the select button.


Thank you for reading hope you enjoyed, +rep please if you use this.

THIS IS A codinghs EXCLUSIVE DO NOT POST ON OTHER SITES WITHOUT MY CONSENT FIRST.

copyright syphongamer08 2009