+ Reply to Thread
Page 1 of 2
1 2 LastLast
Results 1 to 10 of 11
  1. #1
    lerit50's Avatar
    Currently Offline Helper/Tutorial Maker Elite Contributor lerit50 is a codinghs Contributer
    Join Date
    May 2008
    Location
    Djibouti, Djibouti
    Posts
    478
    Points
    310,448.56
    Rep Power
    193

    Default

    Welcome Welcome Welcome to another Lerit50 production :]

    Today I will show you how to make a pandora battery, MMS (magic memory stick) and install CFW 3.71 m33 onto your phat psp

    This tutorial will be made into three major chunks

    1. Softmodding you battery (pandoraize)
    2. Making a MMS
    3. Putting it all together

    So let's get started!

    Part I: Softmodding your psp battery

    HOW TO SOFTMOD YOUR BATTERY

    In this part of my tutorial, I will be showing you how to softmod you battery
    Frequently asked questions:
    Q- How do I know if my battery is compatible?
    A- http://psp-homebrew.eu/images/pandoras-vguide-full.jpg

    Q- Is this safe?
    A- Mostly. The only problem I ran into was accidently touching the motherboard of the battery with metal (DO NOT DO THAT, YOU WILL SHORT OUT YOUR BATTERY MOST LIKELY!) Thankfully, after the smoke had cleared I was able to still use my battery as a Pandora battery.

    Q- Which battery did you use?
    A- The original psp battery that came with my phat. (3.6v, 1800mAh, PSP model 110) So for the sake of this tutorial I will reference to mine. If you have a compatible battery from looking at the picture up top, then you will still most likely be able to mod it the same way I do.

    IF YOU HAVE ANY MORE QUESTION ASK BEFORE GOING AHEAD AND MODDING!!!!!!!!!!!!!!!!

    LOOK HERE-----> http://www.youtube.com/watch?v=6BoSTrSwx7A
    video to help make a pandora battery


    subscribe and rate it 5 :]

    SOFTMODDING
    1)Take your knife/exact knife and CAREFULLY open your battery. Run if along the side of your battery where the lines are. If done correctly, you should hear a clicking or snapping noise, meaning the plastic is breaking. This is what your battery should look like if you have removed it correctly--- and

    2)Once done, look for the connecter labled (ICO4 or CO4) (depending on your battery)

    3)Next take a mechanical pencil with no lead out and CAREFULLY remove the 5th pin (the pins start from the bottom left and up. So pin 5 should be the bottom one on the right.....depending on how you hold your battery.)

    4)Put you battery back together

    Part II: Making a MMS


    First, what is a Magic memory stick, or MMS?
    ·It is a memory stick that has all the appropriate boot files that, if used together with a Pandora battery, will install custom firmware, or CFW, onto your psp


    So how do I make it?
    ·To make a MMS you will need to follow this tutorial!


    THINGS YOU NEED

    * A memory stick that is at or more than 512mb but no more than 2gb
    * A card reader or usb cable that connects to the psp
    * A brain (that was a joke)



    http://dl.qj.net/TOTALNewbi-easyInst...4749/catid/193
    1. ^^^^To start… download the file from the link above ^^^^

    What this does

    * Installs all the appropriate boot files without any hassle
    * Will install cfw 3.71 m33 on your psp when used together with a Pandora battery


    2. Extract the files to your desktop using WinRAR or another .RAR extractor

    3. In the extracted files, find the program called Start.exe

    4. Follow the instructions in the cmd window to make your magic memory stick.

    THINGS TO CONSIDER

    * Back up all your files on your memory stick to your computer (copy + paste to a folder you designate)
    * Formatting your memory stick after doing the backup (this can be done by going into system settings on your psp)
    * In order for this to work you will need a pandora battery

    Part III: Putting it all together
    Now that you have successfully created you Pandora battery and MMS, it is time to get CFW 3.71 m33!
    To do so, put your Pandora battery back into your psp BEFORE, putting in your MMS (magic memory stick). Next put in your MMS.
    If you have done it correctly, both your Wifi and memory stick light should start flashing and your psp will turn on
    (If not then try your MMS and then your Pandora battery [reverse order])
    Follow the onscreen instructions and !TAH DAH! You have CFW!
    To make sure, you to your system information on your psp afterwards to check out your firmware.
    Also, UMD autostart is on, so just hit home and go to your psp XMB if your UMD starts
    After you have rebooted, your screen will be very very very very white. Just go and change your theme color to make it not so bright.
    YEY YOU HAVE CFW
    Any questions?
    Just reply to the thread!

    PLUS MY REP NAO!
    PLUS MY REP NAO!
    PLUS MY REP NAO!
    PLUS MY REP NAO!
    PLUS MY REP NAO!
    Last edited by lerit50; 05-17-2009 at 10:17 AM. Reason: i hope this works lol
    BookFace !

    http://youtube.com/lerit50 <-- Subscribe to support site, videos are being uploaded now

    How to get Custom Firmware (CFW) for your PSP

    Click here and register to help me out


  2. #2
    Join Date
    Feb 2008
    Location
    New York
    Posts
    3,114
    Points
    1,443,393.34
    Rep Power
    212

    Default

    GREAT post
    stickied

  3. #3
    lerit50's Avatar
    Currently Offline Helper/Tutorial Maker Elite Contributor lerit50 is a codinghs Contributer
    Join Date
    May 2008
    Location
    Djibouti, Djibouti
    Posts
    478
    Points
    310,448.56
    Rep Power
    193

    Default

    lol yea.. its just a weee big
    BookFace !

    http://youtube.com/lerit50 <-- Subscribe to support site, videos are being uploaded now

    How to get Custom Firmware (CFW) for your PSP

    Click here and register to help me out


  4. #4
    Join Date
    Feb 2008
    Location
    New York
    Posts
    3,114
    Points
    1,443,393.34
    Rep Power
    212

    Default

    haha it worked =p
    merged...

  5. #5
    Join Date
    Apr 2009
    Location
    earths second moon
    Posts
    36
    Points
    67,010.09
    Rep Power
    182

    Question

    2)Once done, look for the connecter labled (ICO4 or CO4) (depending on your battery)
    do i have to do anything special with the connecter labled (ICO4 or CO4)?

    dont want this to happen

  6. #6
    Join Date
    Apr 2009
    Location
    YTF would I tell you?
    Posts
    180
    Points
    247,883.82
    Rep Power
    182

    Default

    you can also do this to a slim I have another guide on doing this also but the pics on this one are HUGE

  7. #7
    lerit50's Avatar
    Currently Offline Helper/Tutorial Maker Elite Contributor lerit50 is a codinghs Contributer
    Join Date
    May 2008
    Location
    Djibouti, Djibouti
    Posts
    478
    Points
    310,448.56
    Rep Power
    193

    Default

    Quote Originally Posted by skyester View Post
    2)Once done, look for the connecter labled (ICO4 or CO4) (depending on your battery)
    do i have to do anything special with the connecter labled (ICO4 or CO4)?

    dont want this to happen

    well you have to remove the pin from the ICO4... so yes. I'm going to upload a video to youtube explaining how to mod the battery
    BookFace !

    http://youtube.com/lerit50 <-- Subscribe to support site, videos are being uploaded now

    How to get Custom Firmware (CFW) for your PSP

    Click here and register to help me out


  8. #8
    Join Date
    Jan 2009
    Location
    Pennsylvania
    Posts
    266
    Points
    50,233.00
    Rep Power
    185

    Default

    Quote Originally Posted by lerit50 View Post
    well you have to remove the pin from the ICO4... so yes. I'm going to upload a video to youtube explaining how to mod the battery
    Thanks that'd be really great and helpful (=
    WawR.

  9. #9
    lerit50's Avatar
    Currently Offline Helper/Tutorial Maker Elite Contributor lerit50 is a codinghs Contributer
    Join Date
    May 2008
    Location
    Djibouti, Djibouti
    Posts
    478
    Points
    310,448.56
    Rep Power
    193

    Default

    video created... now the whole uploading part..

    when its uploaded, i'll contact all three of you [pm] and have it in the tutorial section
    BookFace !

    http://youtube.com/lerit50 <-- Subscribe to support site, videos are being uploaded now

    How to get Custom Firmware (CFW) for your PSP

    Click here and register to help me out


  10. #10
    Join Date
    Apr 2009
    Location
    earths second moon
    Posts
    36
    Points
    67,010.09
    Rep Power
    182

    Default

    Quote Originally Posted by lerit50 View Post
    well you have to remove the pin from the ICO4... so yes. I'm going to upload a video to youtube explaining how to mod the battery
    ok thanks


+ Reply to Thread
Page 1 of 2
1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts