+ Reply to Thread
Page 1 of 2
1 2 LastLast
Results 1 to 10 of 14
  1. #1
    Join Date
    Aug 2011
    Location
    your roof
    Posts
    386
    Points
    1,550,706.07
    Rep Power
    162

    Thumbs up on/off jokering for noobs (tut)

    Code:
    what you need
    -ram dump
    -controller address
    -hook
    -ps2dis 
    -a code to joker
    finding your controller address :

    note : make sure your cheat device is on pause game : true

    1) hold down one of the button listed below and search that exact value in hex. for this example we will be using "R" hold "R" and search "200" in hex. then let go and search "0" repeat until you only have a few results

    2) for some games this method dosnt work, if you are playing a game where it dosnt work do this. search for an unknown value then hold down your select button and search great. then let go and search less repeat until you only have a few results

    Code:
    Select button = 0001
    Start button = 0008
    Up D-Pad button = 0010
    Right D-Pad button = 0020
    Down D-Pad button = 0040
    Left D-Pad button = 0080
    Left trigger = 0100
    Right trigger = 0200
    Triangle button = 1000
    Circle button = 2000
    Cross button = 4000
    Square button = 8000
    finding your hook :

    1) search "03e00008" in hex copy the results in to your cheat browser and nop them one at a time. when one of them freezes that means you have an active hook. label it or write it down because that's the hook your going to use

    the "negative rule" :

    if the last 16bits of the code you are jokering are above 7f80 you most add 1 to the first 16 bits

    example 1: 0x0881ffff
    because ffff greater then 7f80 you must add one to "0881" so your end code would look like :
    0x0882ffff

    example 2: 0x08810000
    0000 is less then 7f80 so in this case you dont have to do anything

    real and fake addressing:

    to convert a code to real address you just add "08800000" to it you can use a hex calculator to do this

    the reason you need to put the code in real addressing is because psp addressing really starts at "08800000" not "00000000"
    cheat devices like nite just start at "00000000" to make it easy for you or to make the code look cleaner.

    opening & taking your ram dump :

    here's how to take a ram dump simply go to options extras ect then go to the ramdump option and pick a slot then press X and your done.

    opening your ramdump is simply open psp2dis then go to the open option scroll down and select your ramdump once you get it a box will pop on the screen, make sure it address's from "08800000"

    finding your nop cave :

    a nop cave is just a ton of address grouped to gather that all have a value of "0"
    a common nop cave is "08801000"

    here are our mips templates

    if you have a regular code

    Code:
    lui t0 $XXXX //First half of controller address (real addressing) 
    lw t0 $XXXX(t0) //2nd half of controller address
    addiu t1 zero $XXXX //Activate button value
    addiu t2 zero $XXXX // Deactivate button value
    bne t0 t1 $Next bne
    nop
    lui t3 $XXXX //1st half of your code address (real addressing)
    lui t4 $XXXX //1st half of your code's ON value
    ori t4 t4 $XXXX //2nd half of your code's ON value
    sw t4 $XXXX(t3) //2nd half of code address
    bne t0 t2 $To jr ra
    nop
    lui t3 $XXXX //1st half of your code address (real addressing) 
    lui t4 $XXXX //1st half of your code's OFF value
    ori t4 t4 $XXXX //2nd half of your code's OFF value
    sw t4 $XXXX(t3) //2nd half of code address
    jr ra
    if you have dma code

    Code:
    lui t0 $XXXX //first half of controller (real addressing) 
    lw t0 $XXXX //second half of controller(t0)
    lui t1 $XXXX //first half of pointer (real addressing) 
    lw t1 $XXXX //second half of pointer(t1)
    addiu t2 zero $XXXX //button value on
    addiu t3 zero $XXXX //button value off
    bne t0 t2 $XXXX //next bne
    nop
    lui t4 $XXXX //first half of value on
    ori t4 t3 $XXXX //second half of value on
    sw t4 $XXXX //offset (t1)
    bne t0 t3 $XXXX //jump to jr ra
    nop
    lui t4 $XXXX//first half off value
    ori t4 t4 $XXXX//second half off value
    sw t4 $XXXX//offset(t1)
    jr ra
    hook value :


    press any address on ps2dis then enter "J $xxxxxxxx" - first line of your subroutine (real addressing)
    then just put the value you get next the hook you found before hand.

    why do we need a hook?

    because in almost every game it skips over the nop caves so you need a hook to just to your joker.

    finishing the code :

    press command P and then press copy. now copy what you get in to note pad.
    add 0x to the start of every line and every value and subtract "0880" from every line.
    now just copy it in your cheat device and your done!

  2. #2
    Join Date
    Apr 2012
    Location
    Your Mom's Bed
    Posts
    65
    Points
    476,644.75
    Rep Power
    0

    Default Re: on/off jokering for noobs (tut)

    fucking hell that is one big tut to follow up! (I got lost half way through -_-)

  3. #3
    Join Date
    Aug 2011
    Location
    your roof
    Posts
    386
    Points
    1,550,706.07
    Rep Power
    162

    Default Re: on/off jokering for noobs (tut)

    Quote Originally Posted by aptwhka View Post
    fucking hell that is one big tut to follow up! (I got lost half way through -_-)
    not even that long. :l

  4. #4
    Join Date
    Apr 2012
    Location
    Your Mom's Bed
    Posts
    65
    Points
    476,644.75
    Rep Power
    0

    Default Re: on/off jokering for noobs (tut)

    Quote Originally Posted by sdrawkcab View Post
    not even that long. :l
    Lol.. STOP contradicting!! :/
    Last edited by aptwhka; 05-04-2012 at 05:18 PM.

  5. #5
    Join Date
    Aug 2011
    Location
    your roof
    Posts
    386
    Points
    1,550,706.07
    Rep Power
    162

    Default Re: on/off jokering for noobs (tut)

    Quote Originally Posted by aptwhka View Post
    Lol.. STOP contradicting!! :/
    dont type in colored font. its nooby dude.

  6. #6
    Join Date
    Aug 2011
    Location
    your roof
    Posts
    386
    Points
    1,550,706.07
    Rep Power
    162

    Default Re: on/off jokering for noobs (tut)

    Quote Originally Posted by Leegondoory View Post
    Ha, that's a good one.. o_o
    i just said that because he said "stop contradicting" :P

    --

    please some one get rid of this horrible red font ):

  7. #7
    Join Date
    Apr 2012
    Location
    Your Mom's Bed
    Posts
    65
    Points
    476,644.75
    Rep Power
    0

    Default Re: on/off jokering for noobs (tut)

    Quote Originally Posted by sdrawkcab View Post
    dont type in colored font. its nooby dude.
    SO.. NOW IM A NOOB o_o WELL YOUR THIS.. 8:::B---

  8. #8
    Join Date
    Aug 2011
    Location
    your roof
    Posts
    386
    Points
    1,550,706.07
    Rep Power
    162

    Default Re: on/off jokering for noobs (tut)

    Quote Originally Posted by aptwhka View Post
    SO.. NOW IM A NOOB o_o WELL YOUR THIS.. 8:::B---
    and 8 with a B? cewl

  9. #9
    Join Date
    Oct 2011
    Posts
    42
    Points
    293,666.62
    Rep Power
    160

    Default Re: on/off jokering for noobs (tut)

    wow O.O i dont understand O.O can you make a video plz? O.o

  10. #10
    Join Date
    Aug 2011
    Location
    your roof
    Posts
    386
    Points
    1,550,706.07
    Rep Power
    162

    Default Re: on/off jokering for noobs (tut)

    Quote Originally Posted by Oponogo View Post
    wow O.O i dont understand O.O can you make a video plz? O.o
    got it?

+ Reply to Thread
Page 1 of 2
1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts