I just opened up a killzone forum, so if you're a killzone fan, you'll like this! :G
Now for the new codes!
Here's the nondma name imposter, to use it you have two options...
1. put the name you want in the first four lines (highlighted in blue)
2. go to 0x006FC000 in you nitepr browser and you're name will be there, which is just like the dma one, so u can change it right there.
One thing to remember about this code though...
1. Make sure you have Cheat Hz 0/1000 if you want to use option 2.
#Imposter
;CREDiT: _xXxTWiST3DxXx_
;FROM: WWW.codinghs.COM
0x006FC000 0x41464544
0x006FC004 0x5F544C55
0x006FC008 0x454D414E
0x006FC00C 0x00202020
0x006FB000 0x3C0808F0
0x006FB004 0x3C0908DD
0x006FB008 0x8D296E1C
0x006FB00C 0x8D2900F0
0x006FB010 0x1120000B
0x006FB018 0x8D29000C
0x006FB01C 0x8D290004
0x006FB020 0x8D0AC000
0x006FB024 0x8D0BC004
0x006FB028 0x8D0CC008
0x006FB02C 0x8D0DC00C
0x006FB030 0xAD2A0010
0x006FB034 0xAD2B0014
0x006FB038 0xAD2C0018
0x006FB03C 0xAD2D001C
0x006FB040 0x03E00008
0x006FB044 0x0E201953
0x002C4344 0x0E3BEC00
This code lets you keep shooting the chaingun without it overheating, to use it just turn it on then off (once enabled, you can't disable it, I'm sure u won't mind)
#No OverHeat Chaingun
;CREDiT: _xXxTWiST3DxXx_
;FROM: WWW.codinghs.COM
0x006F3000 0x3C080894
0x006F3004 0x3C0908DB
0x006F3008 0x8D2B8F60
0x006F300C 0x8D2C9D28
0x006F3010 0xA10B92A9
0x006F3014 0xA10C92A8
0x006F3018 0x03E00008
0x006F301C 0x0E22A0E9
0x000AAC5C 0x0E3BCC00