If somebody could help me with this, it'd be cool.

[_PRaLiNeS_]

ok i have a couple things for you to try one i would see if a pc running linux recognizes the drive if yes format it

next would be a program that would write zero's onto the drive you can use the western digital data lifeguard program it can also run diagnostics along with writing the zero's anyway once the operation is complete it will read like the was just installed from the factory like when you buy a for your system


try those and see if they work if not you may have to remove the hard drive for its external enclosure and connect it via its sata connectors connect directly to the motherboard if you do that it most likely will be read by your computer

i hope this helped you

it worked =). now i just have to format to fat32 like scruffy said and i should be good.

[LOST_HEAVEN]

I play mw2 with him on PS3 :-), jealous?

Yes that you have a ps3, an no not jealous that your dad bought you a ps3 with his persian terrorist monies. :P

it worked =). now i just have to format to fat32 like scruffy said and i should be good.

My method didn't require a format of any nature.

[_PRaLiNeS_]

I tried it but I accidentally sent you the hard drive so I had to bring call it all back.