OK heres a quick easy guide on how to install NightPR.\
First get NightPR here
( http://www.megaupload.com/?d=J4ILB1UC )
Now Open it
http://img225.imageshack.us/img225/5...enshot9xe4.jpg
You should see 5 things, dont worry about any of them. Just click the "Files" folder.
Clicking the "Files" folder should bring you to this next screen
http://img225.imageshack.us/img225/4...nshot10ip6.jpg
Now, click the "3.71 m33 ONLY" folder if you have 3.71 m33 firmware for your psp. If you dont, click the "ALL OTHER FIRMWARES" folder.
Now, whether you clicked the "3.71 m33 ONLY" folder or the "ALL OTHER FIRMWARES" folder, you should now see a screen that looks like this:
http://img231.imageshack.us/img231/4...nshot11hj0.jpg
Plug your USB cable into your psp and computer, and go to usb mode on your psp
Now drag that "Seplugins" next to your PSP and ISO folder
So that should look like this:
http://img225.imageshack.us/img225/9...nshot12xn6.jpg
Now after thats done copying, turn off your PSP
Hold the "R" button on your psp as you turn it on. This should bring you to a screen that you may / maynot have seen before.
You will see a option called "Plugins", go down and select it.
Now you should see "NightPR.prx" with either "[DISABLED]" or "[ENABLED]".
------If it says [ENABLED], then turn off yoru psp, Your Done!
------If it says [DISABLED], hit "X" and it should now say [ENABLED]
---------If it says [ENABLED], then turn off yoru psp, Your Done!
You have now installed NightPR! Congrats!
