SFDM gun mods part 5: adding a scope!
ok so your sawed off pistols are no good with out a scope and really far range you say?
TRY this tutorial out!!
what im going to teach you: (NOTE:this will only work on a gun with NO scope!!!!!)
how to add a scope to your gun(ill be using the sawed off pistols)
how to make it thermal, night vision, or EDSU, then clear again
make the shot range FULL map
lets being:
1. go find your sawed off pistols in the browser(0x00841A98 )
2. now were going to go down some in the browser(i will be staying in the browse, THIS WHOLE TUT, no decoder it gets confusing for some ppl,ONLY 1 part will be in the decoder!) try and find 803F01-that is just some of the scope we need to add, if you cant find it here(0x00841BD8 )
3. change that 803F01 to 803F00(this doesnt matter too much but it makes for a cool effect when u get good at this =])
4. now you should see a 0040 under it change it to 803F
5. now you should see another 0040 to the LEFT again change it to 803F
6. u have a scope now, but its not going to work to great so lets fine tune it, add a zoom level its the first 00 on the same line to the LEFT keep it set to 00 for a custom lvl(zooms like an AR-15) or put 02 so u can press up twice....etc
7. you might have tested this out, and notice WTF it still doesnt work?!?! well there is 2 more thing u need to do go down to the FFFFFFFF copy and paste those FFFFFFFF's into the decoder u should see 3 rows of them now the middle row is the scope valid values are 0-6 i think
8. now to enalbe all this work we need to change one more value, go back up in the browser and you should be lookin in the ASCII part youll see the guns name(sawed off pistol) the reload, and ahah "cope_standard" there is a space in front of cope standard "..cope_standard" go to the first . press X then up then X again, now circle (all we did was change it to say something else)
9. equip your pistols, and scope you should have a nice brand new scope!!
10. (OPTIONAL!) go to this address 0x00841B38 should start with a B2 now go to the RIGHT a few should be right under 0D and above 19 change the val to w/e u want the scope to be(00 normal, 02 thermal, 04 EDSU, 03 NV i think)
11.(OPTIONAL AGAIN) go to 0x00841B58 the first value is 32 simpley change it to FF and u have full range =] now u can blast people from the other side of the map with your sawed offs!!!
enjoy, if u liked that please leave a thanks, or +rep!
