what is nitePR?
nitePR is an on/off line PSP hacking utility!
how do i get nitePR to work on my PSP??
well first you need custom firmware
The Installation
ok to start off you need custom firmware, im not going over that here, lets begin!
1. download this file: nitePR Rev K
2. now extract it
3. if you are using 3.71 m33, use the one indicated, if any other firmware use the other folder
4. if u have no other plugins installed just put the seplugins folder on the root of the memory stick
5. if you have plugins installed on the memory stick, open the seplugins folder ON THE MEMORY STICK!
6. now open up the GAME.txt file add the following line ms0:/seplugins/nitePR.prx & make a folder called nitepr
7. now place the nitepr.prx in the seplugins folder (pspX>seplugins>nitepr.prx
8. now your done reboot the psp holding the R button
9. go down to plugins hit X on it, then go down to the line nitepr.prx[GAME] click X on it to enable it.
10. now go back and exit
11. load a game and wait for the line at the top to show "tap home twice then press + & -"
12. do that then press start and your in the menu! congrats!
ADDING CODES
now your probably wondering why the list is empty!?
well that's because u haven't added codes yet! lets do that now!
1. find the code of the game your looking for and make a notepad in your nitePR folder(EX: UCUS-98641 is for syphon filter dark mirror, so if you were playing SFDM name your notepad that!)....OK lets get some codes!!!!
2. find the code for the game your looking for HERE!
3. now that we got some codes put them in the notepad you created
4. save the notepad, and go load a game up
5. now after the game is loaded lets use some codes! open nitePR you should see the new codes there! w00t!
NITEPR FUNCTIONS!
now ill teach you how to enable codes, save codes, have them set to "always on" mode...etc
ENABLING CODES:
1. go to the code you want to turn on, lets say INF HEALTH
2. no press X over it it should change to a different color.
3. press O to go back into the game, its not turned on yet press the musical note button its enabled, now you have inf health! do the same to turn it off!
"ALWAYS ON" MODE:
1. find the code that you want to always be on and press square now its blue.
2. now you can either leave it or save it! look below on how to save
SAVING THE CODES:
1. open nitePR and press the R shoulder button & go to PRX
2. now go down some until you find the selection "save cheats"
3. let the cheats save and your done!(you'll know there saving when the orange memory stick light is blinking!)
PAUSING THE GAME
(not good for online play)
1. press the R shoulder button & got to PRX
2. its the first selection, pause game? False or True
False=not paused, true=paused
SETTING CHEAT HZ
1. press the R shoulder button & go to PRX
2. go down some to the selection cheat HZ and press right or left on the D-pad(usually set it to 15, when u need it the code will say it under the name!)
BROWSER
OK you have probably seen the browser it looks like a bunch of numbers in a chart these numbers are in HEX, the browser is also a little harder to read A. it doesn't have the ops code on the side and B. you cant see all the address's.
DECODER
the decoder is what most of us use, its much easier to read because u can take the address's and values and copy them right there.
COPY & PASTING
to copy and paste a code press the select button, you'll get a little menu with copy and paste options press X on copy to copy the code now go to the place u want that address to be and press select again and paste it! pretty useful if your looking at a few address's
OK, that's pretty much every thing you need to know about nitePR, if i missed something someone please tell me and ill add it in there
