sanded gloss offf

[skyester]

i sanded all gloss off (except 4 screen) with really fine sandpaper and took off the logos and symbols
now it looks awesome
srry 4 the huge pics. just press ctrl - a few times or go to view and zoom out
http://trussla.webs.com/P6160278.JPG
http://trussla.webs.com/P6160300.JPG

[Syphongamer08]

well take a picture and show us then

[Syphongamer08]

thats what i was saying, i thinkit would look half retarted... no things that say + - power hold volume... i think it would look very displaced

[Scruffy120]

lol, its prob all gridy and disgusting....

[Syphongamer08]

yea its probabley like all hoarse and you can see the base coat the plastic...

[skyester]

srry for not having pics my camera is broken right now, and it actually looks pretty cool
ill have pics in about 2 days or until i can use a friends camera

[Pain_ELementaL]

It probably does look better. I usually prefer flat surfaces over glossy for the visual appearance...not to mention the lack of finger prints. :K:

Let's see some pics foo'.

[Scruffy120]

It probably does look better. I usually prefer flat surfaces over glossy for the visual appearance...not to mention the lack of finger prints. :K:

Let's see some pics foo'.

psp would be good finger printless, the PS3 too its the same gloss too right? but ps3 u dont need to hold, let alone touch, only to remove the game. but that doesnt get too printed up.

[Pain_ELementaL]

psp would be good finger printless, the PS3 too its the same gloss too right? but ps3 u dont need to hold, let alone touch, only to remove the game. but that doesnt get too printed up.

I have a skin on my ps3...looks pretty badass.

http://ecx.images-amazon.com/images/I/41H5W6zBGZL._SL500_AA280_.jpg

[Scruffy120]

I have a skin on my ps3...looks pretty badass.

http://ecx.images-amazon.com/images/I/41H5W6zBGZL._SL500_AA280_.jpg

thats awesome, is it a decal sticker thing, slip on, or painted on?

[Pain_ELementaL]

It's a vinyl, it cost like $10 on amazon. 3 pieces...one for the main part, one for the disc tray, and one for the little spot next to the the disc tray on the other side of the gray bar.

[Scruffy120]

It's a vinyl, it cost like $10 on amazon. 3 pieces...one for the main part, one for the disc tray, and one for the little spot next to the the disc tray on the other side of the gray bar.

how about the controler? im too lazy to search lol...

[nx.dcr]

ooh i sanded my last psp,
didnt turn out bad actually and after i painted it and such.
Sanded psps actually look pretty good if you do it right :]
It takes the scratches of the metal ring as well. Nice job mangg ;]

[Scruffy120]

ooh i sanded my last psp,
didnt turn out bad actually and after i painted it and such.
Sanded psps actually look pretty good if you do it right :]
It takes the scratches of the metal ring as well. Nice job mangg ;]

shit PICS FOOL!!
i want to see pics of this, and how you did it? i dont wanna screw up lol

[Pain_ELementaL]

how about the controler? im too lazy to search lol...

Cotroller is seperate lol. Pretty sure it's the same kind of thing though.

[nx.dcr]

shit PICS FOOL!!
i want to see pics of this, and how you did it? i dont wanna screw up lol

its my old psp :/ the one that broke.
I dont have it anymore.

But i took a little sander like the kind that goes back and forth,
not the rotating kind, set it on a low speed and just started going.
Just make sure you apply a good amount of pressure and do every part you want sanded.

Then i took off the disk tray (it was actually broken so you might want to take it out the right way xD) and did like 3 coats of spray paint.

I would say either cover up the ring or scrap the paint off after, or maybe cut a paper the same size and put it over the ring as you paint?

So yeah... lmao. thats it for me.

[Scruffy120]

its my old psp :/ the one that broke.
I dont have it anymore.

But i took a little sander like the kind that goes back and forth,
not the rotating kind, set it on a low speed and just started going.
Just make sure you apply a good amount of pressure and do every part you want sanded.

Then i took off the disk tray (it was actually broken so you might want to take it out the right way xD) and did like 3 coats of spray paint.

I would say either cover up the ring or scrap the paint off after, or maybe cut a paper the same size and put it over the ring as you paint?

So yeah... lmao. thats it for me.

i dont think "spray paint" was the best idea for a psp lol....dont need my hands turning like green or some shit.....maybe just sand it all off, idk, i still some what use it?

[nx.dcr]

if you use it right it comes out really good scrufflz :]

[Syphongamer08]

im actually really curious to see what it looks like

[nx.dcr]

Im not doin that to my current psp :O
Just google it or something :]

[Casualdemeanor]

Yeah Googlee Sanded-Gloss off

[skyester]

finally got pics, they're just a bit big