Cereal_Man
04-13-2008, 04:02 PM
how do i use this
bricker
i put the codes in my codes list then what
NOTE: 'þ' IS NOT a 'b' (IMPORTANT)
If you don't see the letter, try changing fonts...
Now, resume reading the rest of the shit
INSTALLATION:
1) Copy seplugins to the root of the memory stick
2) Turn off PSP whilst holding the R-TRIGGER
3) The BIOS should pop up, go to "PLUGINS"
4) Under PLUGINS, turn on "pspBricker"
5) Add these cheats to FTB2:
#BRK_CURRENT_ANIM
;0x00000001 would make it play the second animation group
;0x00000002 would make it play the third animation group, etc.
;I suggest copying this address and changing it in the browser
;Cause if you want to edit it through the cheater, you'd have to
;Turn off the cheat, edit it, close the nitePR menu, open the nitePR menu, and then select the cheat
;For the changes to take effect
0x004EFFFC 0x00000000
#BRK_DISABLE
;Setting this address to anything other THAN 0x00000000 turns the BRICKER PRX OFF
0x004EFFF0 0xFFFFFFFF
#BRK_SPEED_DEF
;The default is 2 FPS, one can set the address to 0 or 0x0007A120 - same shit
0x004EFFF8 0x00000000
#BRK_SPEED_1FPS
0x004EFFF8 0x000F4240
#BRK_SPEED_2FPS
0x004EFFF8 0x0007A120
#BRK_SPEED_4FPS
0x004EFFF8 0x0003D090
#BRK_SPEED_8FPS
0x004EFFF8 0x0001E848
#BRK_ANIM_CLANTAG
;Setting this address to anything other THAN 0x00000000 causes the Bricker to animate the clantag
0x004EFFEC 0xFFFFFFFF
#BRK_RELOAD_FILE
;Setting this address to anything other THAN 0x00000000, causes
;The Bricker PRX to reload the pspBricker.txt file
;And when it loads the file, it sets 0x004EFFF4 to 0x00000000
;Warning: DO NOT have Cheat Hz on with this on as well... cause the Bricker PRX will
;keep on reloading the file since it won't be able to change the address back to 0x00000000
;Anyways, get a PRX that allows for enabling/disabling USB, edit the file, then turn this on
;And the PRX should reload the new file
;But oh yeah, it's untested =o
;Sometimes, for it to work properly, you have to turn off USB before turning this on...
;Might be something to play around with and test out
0x004EFFF4 0xFFFFFFFF
BUGS:
1) Works 99% of the time,
2) Also, some people experience a "switch switch switch" nose for every frame of animation
(The noise being made by the FTB2 lobby)
USAGE:
1) In nitePR, scroll down till you see the cheat:
#BRK_CURRENT_ANIM
2) Press Triangle
Then press "SELECT"
3) Select "Copy Address"
4) Now press "CIRCLE" and go to the BROWSER
5) In the browser, press "SELECT"
6) And hit "PASTE ADDRESS"
7) The browser should take you to address "0x004EFFFC"
8) So it should say:
0x004EFFFC 0?000000SOMEOTHERNUMBERSHERE
0x004F000C SOMEOTHERNUMBERSHERE
9) See that ? mark?
That should be a 0, change it to a 1, 2, etc. to change the animation group currently playing
0=animated imposter group 0
1=animated imposter group 1
etc.
FACTS:
1) pspbricker.txt cannot be more than 8Kb
2) Each animated imposter at max can be 31 letters ({*1} counts as 4 letters)
PSPBRICKER.TXT:
How it works:
þ{*2} (*)(*)
{*2} ( * )( * )
{*2}( * )( * )
{*2} ( * )( * )
þ{*2}O_O
{*1}O_O
{*2}-_-
{*1}O_O
þNULL[DO NOT EDIT]
NULL[DO NOT EDIT]
Each frame of animation is its own line
Add the þ character at the start of each ANIMATION GROUP
Editing the byte at 0x004EFFFC changes the animation group, first group being 00, second group being 01, etc.
DEBUG THOUGHT PROCESS:
1) The animation only animates when someone else with an animation is in the room
---Err, if you press Select/Start, your name should update
---The screen only updates if someone else does something, like joining the room, which is why it
--------may seem like it's not animating on your screen
2) You said there's a 99% of it working, for me it's 0% of it working!
---a) Did you enable the PRX?
---b) Did you copy the pspBricker.txt file as well to the seplugins folder?
---c) Do you have too many PRXs on or a THEMED PSP?
--------Try to disable nitePR, and have only the pspBricker prx working
3) Why does the 'b' show up in my animations, isn't it the start of the animation group?
--------No, YOU used a 'b' probably, when you're supposed to use a special letter
--------I suggest you get the original pspBricker.txt and copy paste the special symbol
--------If you do not see the special symbol, change your font to SYSTEM or TERMINAL
4) Is there a way to turn this sh*t off?
--------Yes, enable BRK_DISABLE
5) Why do I hear a clicking noise for each frame of animation?
--------That's a bug, affects only a number of people =/
6) Can I animate clan tags?
---------Yes, enable BRK_ANIM_CLANTAG
7) Can I edit the "NULL[DO NOT EDIT]" one?
---------Yes, you can. It was put there to serve as a TEMPLATE that can be copy/pasted
8) What are the memory limits?
---------31 letters per line, but pspBricker.txt has to be less than 8Kb in total
9) Why is it called pspBricker?
---------Because it bricks your PSP and rapes your mom (if applicable),
---------------and sister (if applicable).............. and dog............... if applicable
10) How do I change my animtions from one group to the next:
---------In the browser, go to that address given in the README
-----------It takes you to an area that has: ADDRESS 00000000WEIRD NUMBERS FOLLOW
-----------The Weird numbers that follow are the ANTI-BOOT (if you have it on)
-----------Change the red 0 to a 1 to switch to animation 1, a 2 to switch to animation 2, etc.
11) Is there a way to make animation switching easier?
----------Yes, make a bunch of nitePR cheats that change the address to whatever you want
#PENIS_ANIM
ADDRESS 0x00000001
#BOOB_ANIM
ADDRESS 0x00000002
etc.
12) I do it the short way by editing NPR2PSPBRICKER from 0x00000000 to 0x00000001, etc.
But it only works once... when I change it from 0x00000001 to 0x00000002, it does nothing!
--------Ok, this is how it works: nitePR does not update the changes to the edited cheat until you
--------Turn off the cheat by deselecting it, then close the nitePR menu, open it up again,
--------and select the cheat =o
--------This might seem like a pain in the ass procedure but it was done so that the people who like to edit
--------the cheats in nitePR do not crash
bricker
i put the codes in my codes list then what
NOTE: 'þ' IS NOT a 'b' (IMPORTANT)
If you don't see the letter, try changing fonts...
Now, resume reading the rest of the shit
INSTALLATION:
1) Copy seplugins to the root of the memory stick
2) Turn off PSP whilst holding the R-TRIGGER
3) The BIOS should pop up, go to "PLUGINS"
4) Under PLUGINS, turn on "pspBricker"
5) Add these cheats to FTB2:
#BRK_CURRENT_ANIM
;0x00000001 would make it play the second animation group
;0x00000002 would make it play the third animation group, etc.
;I suggest copying this address and changing it in the browser
;Cause if you want to edit it through the cheater, you'd have to
;Turn off the cheat, edit it, close the nitePR menu, open the nitePR menu, and then select the cheat
;For the changes to take effect
0x004EFFFC 0x00000000
#BRK_DISABLE
;Setting this address to anything other THAN 0x00000000 turns the BRICKER PRX OFF
0x004EFFF0 0xFFFFFFFF
#BRK_SPEED_DEF
;The default is 2 FPS, one can set the address to 0 or 0x0007A120 - same shit
0x004EFFF8 0x00000000
#BRK_SPEED_1FPS
0x004EFFF8 0x000F4240
#BRK_SPEED_2FPS
0x004EFFF8 0x0007A120
#BRK_SPEED_4FPS
0x004EFFF8 0x0003D090
#BRK_SPEED_8FPS
0x004EFFF8 0x0001E848
#BRK_ANIM_CLANTAG
;Setting this address to anything other THAN 0x00000000 causes the Bricker to animate the clantag
0x004EFFEC 0xFFFFFFFF
#BRK_RELOAD_FILE
;Setting this address to anything other THAN 0x00000000, causes
;The Bricker PRX to reload the pspBricker.txt file
;And when it loads the file, it sets 0x004EFFF4 to 0x00000000
;Warning: DO NOT have Cheat Hz on with this on as well... cause the Bricker PRX will
;keep on reloading the file since it won't be able to change the address back to 0x00000000
;Anyways, get a PRX that allows for enabling/disabling USB, edit the file, then turn this on
;And the PRX should reload the new file
;But oh yeah, it's untested =o
;Sometimes, for it to work properly, you have to turn off USB before turning this on...
;Might be something to play around with and test out
0x004EFFF4 0xFFFFFFFF
BUGS:
1) Works 99% of the time,
2) Also, some people experience a "switch switch switch" nose for every frame of animation
(The noise being made by the FTB2 lobby)
USAGE:
1) In nitePR, scroll down till you see the cheat:
#BRK_CURRENT_ANIM
2) Press Triangle
Then press "SELECT"
3) Select "Copy Address"
4) Now press "CIRCLE" and go to the BROWSER
5) In the browser, press "SELECT"
6) And hit "PASTE ADDRESS"
7) The browser should take you to address "0x004EFFFC"
8) So it should say:
0x004EFFFC 0?000000SOMEOTHERNUMBERSHERE
0x004F000C SOMEOTHERNUMBERSHERE
9) See that ? mark?
That should be a 0, change it to a 1, 2, etc. to change the animation group currently playing
0=animated imposter group 0
1=animated imposter group 1
etc.
FACTS:
1) pspbricker.txt cannot be more than 8Kb
2) Each animated imposter at max can be 31 letters ({*1} counts as 4 letters)
PSPBRICKER.TXT:
How it works:
þ{*2} (*)(*)
{*2} ( * )( * )
{*2}( * )( * )
{*2} ( * )( * )
þ{*2}O_O
{*1}O_O
{*2}-_-
{*1}O_O
þNULL[DO NOT EDIT]
NULL[DO NOT EDIT]
Each frame of animation is its own line
Add the þ character at the start of each ANIMATION GROUP
Editing the byte at 0x004EFFFC changes the animation group, first group being 00, second group being 01, etc.
DEBUG THOUGHT PROCESS:
1) The animation only animates when someone else with an animation is in the room
---Err, if you press Select/Start, your name should update
---The screen only updates if someone else does something, like joining the room, which is why it
--------may seem like it's not animating on your screen
2) You said there's a 99% of it working, for me it's 0% of it working!
---a) Did you enable the PRX?
---b) Did you copy the pspBricker.txt file as well to the seplugins folder?
---c) Do you have too many PRXs on or a THEMED PSP?
--------Try to disable nitePR, and have only the pspBricker prx working
3) Why does the 'b' show up in my animations, isn't it the start of the animation group?
--------No, YOU used a 'b' probably, when you're supposed to use a special letter
--------I suggest you get the original pspBricker.txt and copy paste the special symbol
--------If you do not see the special symbol, change your font to SYSTEM or TERMINAL
4) Is there a way to turn this sh*t off?
--------Yes, enable BRK_DISABLE
5) Why do I hear a clicking noise for each frame of animation?
--------That's a bug, affects only a number of people =/
6) Can I animate clan tags?
---------Yes, enable BRK_ANIM_CLANTAG
7) Can I edit the "NULL[DO NOT EDIT]" one?
---------Yes, you can. It was put there to serve as a TEMPLATE that can be copy/pasted
8) What are the memory limits?
---------31 letters per line, but pspBricker.txt has to be less than 8Kb in total
9) Why is it called pspBricker?
---------Because it bricks your PSP and rapes your mom (if applicable),
---------------and sister (if applicable).............. and dog............... if applicable
10) How do I change my animtions from one group to the next:
---------In the browser, go to that address given in the README
-----------It takes you to an area that has: ADDRESS 00000000WEIRD NUMBERS FOLLOW
-----------The Weird numbers that follow are the ANTI-BOOT (if you have it on)
-----------Change the red 0 to a 1 to switch to animation 1, a 2 to switch to animation 2, etc.
11) Is there a way to make animation switching easier?
----------Yes, make a bunch of nitePR cheats that change the address to whatever you want
#PENIS_ANIM
ADDRESS 0x00000001
#BOOB_ANIM
ADDRESS 0x00000002
etc.
12) I do it the short way by editing NPR2PSPBRICKER from 0x00000000 to 0x00000001, etc.
But it only works once... when I change it from 0x00000001 to 0x00000002, it does nothing!
--------Ok, this is how it works: nitePR does not update the changes to the edited cheat until you
--------Turn off the cheat by deselecting it, then close the nitePR menu, open it up again,
--------and select the cheat =o
--------This might seem like a pain in the ass procedure but it was done so that the people who like to edit
--------the cheats in nitePR do not crash