PDA

View Full Version : How To Transfer Large Files From PC To PS3 Lan Speed 100mbs



aptwhka
04-10-2012, 05:47 PM
Step 1: Computer Setup
Go to “Control Panel” and under “Network and Internet” click “View network status and tasks” To open “Network and Sharing Center“. On the left side panel, click “Change adapter settings“. Identify which device is the LAN port you will be using, right click on it and select “properties”. Click on the item “Internet Protocol Version 4 (TCP/IPv4)” then click the button “Properties“. Click “Use the following IP address:” and “Use the following DNS server.

Windows XP

Go to the start menu and hover over “Connect to“. Select “Show all connections“. Identify which device is the LAN port you will be using, right click on it and select “properties“. Click on the item “Internet Protocol Version 4 (TCP/IPv4)” then click the button “Properties”. Click “Use the following IP address:” and “Use the following DNS server addresses:”

IP address: 10.1.1.1
Subnet Mask: 255.255.255.0
Default gateway: 10.1.1.1

"Use the following DNS server addresses"

Preferred DNS server: 10.1.1.0
Alternate DNS server: 10.1.1.100

Step 2:PS3 Setup
Go to the settings tab on the XMB, then select “Network Settings” followed by “Internet Connection Settings“. Push ok on the prompt and select “Custom“, “Wired Connection“, “Auto-Detect” then “Manual“. Fill out the form as follows.

IP Address 10.1.1.2
Subnet Mask 255.255.255.0
Defualt Router 10.1.1.0
Primary DNS 10.1.1.0
Secondary DNS 10.1.1.10

Select “Automatic“, “Do Not Use” and “Enable“. Push X to save the settings. Test connection to verify you can acquire an IP Address. Internet Connection should fail.
Open your FTP Sever on your PS3. I prefer BlackB0x FTP 1.2 , but you can use MultiMAN or other types if you wish. It should tell you your IP Address is 10.1.1.2 .

Step 3: FTP Client Setup
Open your FTP client (anyone will do, eg SmartFTP or FileZilla) and type in your PS3 IP (10.1.1.2) and make sure its on Port 21. IF you used a FTP server other than BlackB0x FTP 1.2, check if it needs credentials to work. Connect and begin transferring.

Speeds should be very high as your connected directly to your PS3.

Thats it folks, if you have any questions PLEASE ASK!